Installations - Oil Tanks
Complete Oil Tank Installations & Tank Abandonment Services - Secure, Durable & Reliable
Shoreline Petroleum installs Granby Steel Tanks and Roth Double-Wall Fuel-Oil Safety Tanks.
These companies are leaders in the manufacture and distribution of petroleum storage products, and we prefer them because they offer the safest, most reliable tanks you can use in residential and commercial installations, above ground or underground. It is often necessary to remove an old fuel tank before you can install a new one. Therefore, we recommend you call Shoreline Petroleum first, we have years of experience and the required resources to carry out all types of fuel tank abandonments, in either above ground or below ground situations. All abandonments come with certification certificates. Please call us today to schedule a maintenance inspection of your equipment.
STANDARD - 275 gal. and 330 gal.
Always a tough tank
Welded lap joint: the strongest one
Easy to install
10-year warranty on manufacturing defect
• Steel ASTM A-1011
• Female fully welded NPT openings
• Pressure tested at 5 to 7 PSIG
• UL 80 compliant
• Operation at atmospheric pressure only
• Can be made to comply with UL142 for 275 & 330 gal tanks
• External surface: Washed and phosphate
External finish black or grey: electrostatic baked powder paint
BETTER QUALITY
NEW - 275 gal. and 330 gal.
THE SAFEST, MOST RELIABLE TANK YOU CAN BUY; an exceptional product coupled with increased protection.
SAFETY
Double bottom tank with leak DETECTION system eliminates leakage risk
15-year warranty on manufacturing defect
10-year warranty against internal perforation, a first in the industry!
Granby Steel Tanks holds 2 million $ in liability insurance coverage.*
ALARM SYSTEM
Standard float leak detection system
* Some restrictions may apply
BEST QUALITY
PROTEC20 - 275 gal. and 330 gal.
BETTER EXTERNAL PROTECTION
The polyurethane coating could resist to pressure up to 25 PSIG (maximum operating pressure is 1 PSIG), ensuring high safety and protection against leakage caused by external corrosion.
LIFETIME
The finish prevents external corrosion and is UV resistant to prevent condensation.
20-year extended warranty against manufacturing defect*
Granby Steel Tanks holds 2 million $ in liability insurance coverage.*
* Some restrictions may apply
TOP OF THE LINE
ECOGARD / PROTEC20 - 275 gal. and 330 gal.
POLYURETHANE EXTERNAL COATING
100 % safe tanks with PROTEC20 and ECOGARD
25-year warranty* against manufacturing defect
10-year warranty* against internal corrosion
THE SAFEST, MOST RELIABLE TANK YOU CAN BUY
SAFETY
Double bottom tank with leak detector system eliminates leakage risk
ALARM SYSTEM
• Standard float leak detection system
• Optional electronic alarm
POLYURETHANE EXTERNAL COATING
BETTER EXTERNAL PROTECTION
The polyurethane coating could resist to pressure up to 25 PSIG (maximum operating pressure is 1 PSIG), ensuring high safety and protection against leakage caused by corrosion.
LIFETIME
The finish prevents external corrosion and is UV resistant to prevent condensation.
* Some restrictions may apply
UL142 - ABOVEGROUND COMMERCIAL TANK
GENERAL CHARACTERISTICS:
OPENINGS:
• A = 2" Fill
• B = 2" Utility
• C = 2" Vent
• D = 2" Suction
• E = 1" Gravity feed or drain (optional)
• F = (see table) Emergency vent opening
Skids for easy handling and maximum stability
Labelled UL 142 on supports
OPTION:
Commercial sandblast and Acrylathane paint
TECHNICAL SPECIFICATIONS:
• Steel ASTM A-1011
• Female threaded openings
• Pressure tested at 5 to 7 PSIG
• For stationary installation at atmospheric pressure only
• External finish: grey alkyd paint
• These tanks are certified to contain petroleum products under the UL 142 ON SUPPORTS label
• Skids have been proof tested under severe UL 142 requirements
• Legs have been proof tested under severe UL 142 requirements
WARRANTY:
Aboveground Tank - 3 years
UL58 - UNDERGROUND PROTECTED TANK
GENERAL CHARACTERISTICS:
Tank built for environmental protection
30-year limited warranty
Comes with:
• Monitor collar
• Patching kit
• Capacity chart (inches & gal)
• Gauge stick (inches)
• Installation manual
TECHNICAL SPECIFICATIONS:
• Steel ASTM A-1011, A-635 or A-283 Gr. C
• Female threaded openings with dielectric nylon reducers and shipping plugs
• Magnesium anodes
• Pressure tested at 5 to 7 PSIG
• External finish: commercial sandblast (SSPC-SP6) and black polyurethane paint (16 mils)
• UL 58 label
• Atmospheric pressure operation only
WARRANTY:
Underground protected Tank - 30 years
DOUBLE-WALL FUEL-OIL SAFETY TANK® - 275 gal. and 550 gal.
Quality control of Roth finished products is carried out according to ISO 9001 standards, ensuring consistently superior quality and peace of mind. Each tank undergoes thorough testing; including ultrasound tests to ensure optimal thickness of plastic, and pressure testing to ensure the tank is sealed completely. Roth tanks can be used for heating oil or diesel fuel.
Features:
• Weld-free galvanized steel outer tank
• Seamless and weld-free inner tank
• Corrosion resistant inner tank
• Pipe connections are above the oil level
• Minimum floor space required
• Storage capacity increase by using 2 or more tanks
• Removable base for easy accessibility
• Best warranty for similar tanks in the market*
*ROTH tanks are so reliable Roth offers 10 years of insurance up to $5 million PLUS a 15 years product warranty.